The TK128 is a sophisticated programmable Electronic Fuze
system for main battle tanks against targets other than tanks.
The TK128 is a multi-functional fuze system designed for
105mm guns. It includes communication capabilities with
the fire control system of the tank.


ResheFuze TK128
Tank Electronic Multi-Functional Fuze System
TECHNICAL SPECIFICATIONS
Open All
COMPATIBILITY
105mm tank guns, for use with APAM ammunition. The TK128 is
a multi-functional fuze system, that can provide rapid and lethal
direct fires in support of assaulting infantry, penetrating bunkers
and buildings with maximum resulting damage. It can destroy light
armored vehicles, and also destroy helicopters for self-defence.
OPERATION MODES
N\A
TIME DELAY SETTING
Automatic setting: Range data is derived from the fire control system
of the tank, and then translated into the timesetting.
This is then transmitted to the fuze, by the
fuze-setter, through induction methods.
Automatic setting
system:
Automated by the system fuze-setter, through
receiving coil when fuze is set to “auto”. The data
is kept in memory for a practically unlimited period
of time, or until it is reset , generated by the fire
control system, and transmitted by the fuze-setter.
Manual Setting: Setting is performed on “range to target” data.
Range indication is internally translated into
time-setting.
Manual setting
system:
Digital setting, positive self-locking by three
setting rings.
SETTING SYSTEM
N\A
ACCURACY
The maximum range deviation of the fuze is 10m. The standard
deviation of the delay error is less than 0.01 seconds (when on the
automatic setting mode).
POWER SUPPLY
Reseve battery.
ARMING
By two independent
arming mechanisms:
Set-back force of 50g minimum.
Spin rate of 1700 RPM minimum.
BACK-UP
N\A
FUZE INITIATION
N\A
SAFETY
N\A
HUMAN ENGINEERING
N\A
EXPLOSIVE OUTPUT
30g black powder.
TEMPERATURE LIMITS
Operation: From -40°c to +63°c
Storage: From -46°c up +71°c
PHYSICAL DESCRIPTION
Overall length: 195.5mm maximum
Intrustion size: 38.1mm maximum
Cross section diameter: 61.2mm
Thread size: 2”-12UNS-1A
Weight: 905 ± 50gr
MILITARY STANDARDS
MIL-STD-331: Environmental and performance tests for fuze
and fuze components.
MIL-STD-333: Fuze, projectiles and accessory contours.
STANAG 4187: Fuzing system - safety design requirements.
MIL-STD-1316: Fuze design, safety criteria.
HEIGHT OF BURST
N\A
IMMUNITY
N\A
POINT DETONATING
N\A
Tank ResheFuzes